Ford Fe pro Stock Engineering base intake manifold

Description

Ford Fe pro Stock Engineering base intake manifold.
These intake are getting very hard to find but this intake will need some tlc. The intake has no stripped threads and looks to be in cosmetically nice shape, I glass beaded it so you can see what you are bidding on. I got this a while back and looks like to someone did some porting on it and that cause some issues. I held a Cleveland gasket up to show you in photos how the ports look to the gasket and looks like they match fairly well but it looks like they broke through to the push rod tube while doing so and welded it up (tried to show all of it in photos)to fix it and just left it, on the driver side of intake the back two push rod tubes are welded, second front the front is fine, but the front push rod tube has a tiny bit of epoxy in it it and a tiny bit of weld in the port that is smooth out I guess to insure it seals. On passenger side every port their is one push rod tube that has weld going down, and the back port has a small hole. I wanted to hold on to it but I just have too many projects and not enough time, so this intake will need some work but if you are a handy man with a tig welder it can be definitely fixed just have to put the time into it, they are getting very hard to find a pse intake today so with some work can have a nice base to a tunnel ram set up. If you want more pictures feel free to ask eBay only let’s me post 12 photos.