-40%
JBL Control SB2210 Dual 10" Indoor/Outdoor Subwoofer 4 Restaurant/Bar/Cafe/Patio
$ 716.78
- Description
- Size Guide
Description
Car Audio & VideoPro Audio
Marine Audio
Lighting
Karaoke
Home/Portable Audio
(2) JBL Control SB2210 Dual 10" Indoor/Outdoor Subwoofers+Amplifier 4 Restaurant
Click Thumbnails to Enlarge
Condition and Warranty
Condition:
BRAND NEW IN ORIGINAL PACKAGING
Warranty:
2 YEAR MANUFACTURER
Product Description
Package Includes:
(2) JBL Control SB2210 Dual 10" Indoor/Outdoor Subwoofer 4 Restaurant/Bar/Cafe/Patio
(1) Rockville RPA14 7000 Watt Peak / 2000w RMS 2 Channel Power Amplifier Pro/DJ Amp
Description:
The Control SB2210 provides low frequency reinforcement for a wide variety of sound system applications. Its compact size, high output and outdoor capable design makes it one of the most versatile subwoofers in the installation market.
Features:
2 x 250 mm (10 in.) Woven Fiberglass Cone LF Drivers
500 Watts Power handling
Frequency Response Down to 38 Hz
13 x M6 Insert Points Including Inserts for Optional U-Bracket
Compact, Low Profile Design
Specifications:
Frequency Range (-10 dB): 38 Hz - 500 Hz
Frequency Response (-3 dB): 48 Hz - 95 Hz
Power Rating: 500W (2000W peak) Continuous Pink Noise (2 hrs) 1000W Continuous Program(2 hrs) 400W (1600W peak) Continuous Pink Noise (100 hrs)
Maximum Input Voltage: 60.0VRMS (2 hrs), 120V peak
Sensitivity: 95 dB, 1W @ 1m in half-space (2π loading, average 50 – 90 Hz)
Max SPL: 122 dB in half-space (2π loading)
Nominal Impedance: 8Ω
Minimum Impedance: 7.2Ω at 160 Hz
Recommended Filter: 45 Hz, 24 dB/oct high-pass filter
Low Frequency: Two 250 mm (10 inch) diameter LF drivers, long-excursion design, woven fiberglass cone, highly damped butyl rubber surround, linear suspension spider, high temperature anodized aluminum voice coil former, high-temp voice coil wire and coil adhesive, FEA optimized motor construction, aluminum conductive ring.
Enclosure Material: High Impact PolyStyrene (HIPS) w/ 10% glass fill and internal 8 mm polyurethane co-mold, painted with highly-UV-resistant paint on white (-WH) model for maximum UV fade resistance.
Grille: Thermoset composite coated steel, zinc-plated, 3-layer foam backing.
Environmental: IP-45 rating per IEC529 when installed with included MTC-PC2 terminal panel cover. Exceeds MilSpec 810 for humidity, salt spray, temperature & UV. Passes Mil-STd-202F for salt spray.
Terminals: Screw-down terminal strip, zinc plated copper base, nickel-plated metal screws/washers. Accepts up to 9 mm outside, 4 mm inside open lug (#6, #8 or #10 lug), plus bare wire (up to 12
AWG/2.5mm2)
Included MTC-PC2 and optional MTC-PC3 protective covers available to provide sealed entrance for additional weather protection.
Agency Rating: ROHS-compliant. Optional MTC-SBT300 transformer is UL recognized per UL1876.
Color: Black
Dimensions: (H x W x D)
355 x 590 x 570 mm (14 x 23.3 x 22.5 in.)
Net Weight: 23.31 kg (51.4 lb)
Shipping Weight: 25.85 kg (57.0 lb)
Included Accessories: 1 x MTC-PC2 input panel cover, 4 x floor standing feet 4 x beveled washers.
Transformer Taps: 70V: 300W, 150W,
75W, 38W
Transformer Taps:
100V: 300W, 150W, 75W
How to Set Up Your RPA12, RPA14, and RPA16:
Video of RPA14:
Power Ratings:
RMS Power Output:
Stereo 8 Ohm: 2 x 700W
Stereo 4 Ohm: 2 x 1000W
Bridged 8 Ohm: 1 x 2000W
Peak Power Output:
Stereo 4 Ohm: 2 x 3500W Max
Bridged 8 Ohm: 1 x 7000W Max
Terminals:
Input Terminals:
Combo jack (XLR and ¼”) A & B inputs
Output Terminals:
Banana binding post speaker output
Speakon output
XLR output to connect another amplifier or powered sub
Features:
Rockville RPA14 7000 Watt Peak 2 Channel Professional/DJ Rack Mount Amplifier
LCD displays volume in dB per channel and operating temperature
2U rack space
Built in limiter protects your speakers from distortion and clipping
Bridged mode allows you to combine both channels power into one channel for use with a subwoofer
Stereo mode is perfect for (2) speakers or (4) speakers in a left and right configuration
Parallel mode gives you dual mono output signal which is perfect for monitor use when you want all sounds coming out of each speaker instead of a left/right configuration
Built in crossover switch (bypass, 80 Hz, 160 Hz) allows amp to be used with full range PA speakers, or Subwoofer(s)
Channel A & B Clipping Led Indicators
Channel A & B Separate Level Controls
Power, signal, clipping, and protection LED indicators on front of amp
Heavy duty rack mount ears with handles
Built-in variable high velocity quiet cooling fans
Maximum headroom for 4-ohm and 8-ohm Speakers
Level controls for precise setting and matching of sensitivity
Computer controlled IC protection circuitry against speaker short circuit, thermal over load, DC over load
User serviceable fuse (20A, 250V)
Frequency Response (bandwidth @ 2Vrms out, @ -3.0dB) 10 Hz – 30 Khz
THD + Noise @ 1Khz full power: <0.03%
Input Impedance: 10K Ohm Balanced
Input signal voltage: 660mV – 1.5V
Input sensitivity: 0.7v
Damping factor: ( 100Hz, 10w, 4 ohms): 43.4
Damping factor: (1Khz @ 8 ohm): >400:1
Effective damping factor (100Hz, 10w, 4 Ohms) 1.08
Output impedance at speaker terminals: 0.09214 Ohms
Frequency Response vs THD+N (worst case, across normal bandwidth 1W) 0.6%
Signal to Noise Ratio: > 100dB
IMD 60Hz & 1kHz, 4:1: <0.04%
SLEW RATE (input filter limited) : 40v/uS
Power Requirements: 120V / 50-60Hz
Weight: 28.7 lbs
Dimensions: 19.09 x 16.93 x 3.35 inch
Owner's Manual
Return Policy
AudioSavings Return Policy:
At Audiosavings, we strongly believe in customer satisfaction and therefore offer free return shipping within 30 days of purchase on all items returned to us within the continental USA.
Prior to returning merchandise, contact us and we will give you a return authorization # and a return label.
You may return this item for a refund within 30 DAYS of purchase.
Warranty Repair/Exchange Period: 2 YEAR
If your item is defective or you want to return it for any reason within the first 30 days of when it was delivered to you; you have the following options:
We will send you a
pre-paid shipping label
to replace the item for a brand new one.
We will send you a
pre-paid shipping label
to exchange the item for another item of your choice. If the item you chose is more or less money we will work out the price difference with you.
If you are returning a
working item
in used condition for a refund there will be a 20% used item fee deducted from your refund. All replacements and exchanges are free.
Replacement/Processing Time:
Your replacement or refund will process within 3-5 business days of when we receive the item.
Please note
items with physical damage un-related to shipping are not covered under warranty. Registered software cannot be returned.
You
MUST notify us within 48 hours
if you receive an item that was damaged during shipping.
Process for returning items
Please email us with your eBay user ID, Item code / model #, Condition of the item, and the reason for your return. Please also indicate whether you would like a replacement, an exchange, or a refund. We will supply you with a reference number (RMA #) to put on the package which will ensure quick processing of your return.
All returns require a RMA# to be returned back to our facility.
Item Code: (2) Control SB2210+RPA14
Home
/
About Us
/
Contact Us
/
Returns
/
FAQ's
Copyright © 2016
Audio Savings
, All rights reserved. |
eBay Template Design